Moonwalks manufacture / Sales section.

Moonwalk inflatables are a unique concept in which there are 2 inflatable sections powered by independent bouncy castle blowers.

The bottom half of the inflatable moonwalk domes for sale is exactly the same as a conventional bouncy castle bed and is powered by a standard 1.5hp blower and gives the inside floor a real bounce. Yet the top half is inflated by a giant Moonwalk 3000 high pressure blower which keeps the structure upright.

The idea is that the participants can bounce around inside for hours of fun. The domes and moonwalk range is ideal for wet weather parties and due to having no solid walls the bouncing area is greatly increased. We can manufacture these moonwalks in any size you require.

  • 1.5hp Blowers are Available in our accessories shop CLICK HERE
  • 3000 pressure blowers are also available in our accessories shop CLICK HERE

Please check through our selection of Moonwalks inflatables and see if there’s anything that tickles your fancy. If you cant see anything you like, please feel free to visit our Custom Designs/ Bespoke Builds section and see if we can help.

EN14960 Risk Assessment Statement. All our domes comply with EN14960, However some risk assessment has been used in its design.

Domes by there nature require a larger base depth to counteract the high pressure of the air bag above and as such end up with a platform significantly higher than a standard inflatable and of that normally allowed under EN14960. The smaller bed does create its own safety issues which cause the inflatable to belly at the base and rock side to side side even when anchored correctly, to which the supervisors have no control over.

For this reason and through over 25 years experience of manufacturing these domes, we have found that the best form of entry/ exist to the domes is through gentle access & egress in the form of a ramp. This ramp is taller than the maximum fall of height typically allowed under EN14960, However consideration has been given to this and the step has been widened and in some cases fitted with a mini wall to ensure a firm foothold and to prevent a user from slipping of sideways and reducing the chance of a fall occurring from the abnormal height.

Given the above, There must be control measures in place at all times, These controls are matting placed directly in the fall off area. These mats must be 4" thick in order to achieve the correct impact resistance for the higher bed & The inflatable must not be used without them.

This control, combined with the 2 supervisor required per entrance and exit under EN14960, should be sufficient to prevent any accidents from occurring. Remember the ramp is only in place to aid access and egress from the bouncing area & is not for bouncing and sliding.

I can also confirm that to date, No recorded Injury accidents have been recorded by ourselves & no notifications have been received from any HSE department across Europe & the rest of the world.

Please note that a ramp is provided as standard in order to gain access to the play area only & not for bouncing and sliding. Alternative step is available if required. If in any doubt, please consult with your tester before choosing a ramp/ step.

Substituting a ramp for a step is free of charge at time of order.

For multiple purchase orders, Please feel free to Contact Us or use the Request A Quotation feature below each bouncy castle and inflatable for sale & we'll be happy to help.Call us today on 07838163196 & remember all prices displayed are +vat

 

*Most of the products on this website have been drafted as a concept product and purely as a marketing exercise. The artwork used may require a licensee fee to be paid in order to allow us to reproduce it for commercial gain.

This will be discussed at time or order and the license acquisition may take upto 4 weeks unless a license is already held. The products shown above will have been reworked and have new artwork sewn into for sale.